塔吊｜整机与配件 | Zhinuo Safety Technology

整机

塔吊整机产品。

TC5013 平头塔式起重机

塔吊ZN-TC-5013

TC5013 平头塔式起重机

50 米臂长、最大起重量 6 吨、臂端 1.3 吨，适合中层建筑与场地受限工况的紧凑型平头塔机。

TC6010 平头塔式起重机

塔吊ZN-TC-6010

TC6010 平头塔式起重机

60 米臂长、最大起重量 6 吨、臂端 1.0 吨，面向高层与装配式施工的通用型平头塔机。

TC6013 平头塔式起重机

塔吊ZN-TC-6013

TC6013 平头塔式起重机

60 米臂长、最大起重量 8 吨、臂端 1.3 吨，兼顾幅度与起重能力，适合高层、桥梁与重型结构施工。

TC7015 平头塔式起重机

塔吊ZN-TC-7015

TC7015 平头塔式起重机

70 米臂长、最大起重量 10 吨、臂端 1.5 吨，面向超高层、场馆与基础设施项目的大型平头塔机。

配件

标准节、地脚螺栓、附墙、滚轮、吊钩与起升绳等塔吊配件。

查看全部 3D 浏览

Mast Standard Section

ZN-TC-MAST-01Mast Standard SectionBolted lattice section with square-tube chords and seamless-tube bracing for tower erection.查看详情

Base Frame

ZN-TC-BASE-01Base FrameLoad-bearing base frame anchored to the concrete foundation, carrying the full vertical and overturning loads.查看详情

Slewing Unit

ZN-TC-SLEW-01Slewing UnitConnects the mast to the upper structure; the slewing bearing and mechanism enable 360 degree rotation.查看详情 ZN-TC-TRANS-01Transition Section (Slew Tower)Short lattice tower between the slewing bearing and the working arms. It carries both the jib and the counter-jib roots — the structural signature of a flat-top crane.查看详情

Tower Head (Apex)

ZN-TC-HEAD-01Tower Head (Apex)Truss structure atop the mast, anchoring the jib and counter-jib pendants and taking their tension.查看详情

Jib (Working Arm)

ZN-TC-JIB-01Jib (Working Arm)Lattice jib carrying the trolley and hook; assembled from sections to suit various working radii.查看详情 ZN-TC-TRLY-01TrolleyRuns on the two bottom chords of the jib and sets the working radius; carries the hoist rope sheaves that lead the rope down to the hook block.查看详情

Counter-Jib

ZN-TC-CJIB-01Counter-JibShort arm opposite the jib, carrying counterweights and the hoist winch to balance lifting moment.查看详情